Posted on by admin

How do Water Softeners Work?

A water softener is a special type of filter that eliminates calcium and magnesium in hard water and replaces them with sodium through the ion exchange system. Since calcium and magnesium interfere with the action of soaps and detergents while sodium does not, a water softening system is important to ensure detergents are able to eliminate dirt and oil stains more effectively. It also provides a slippery feel to the skin when you wash.

Components Of A Water Softener

A water softener is made up of three major components –a resin or mineral tank, a control valve, and a salt-water tank. The mineral tank is the area where water softening takes place and incoming water passes through plastic-like beads also known as resin and made of polystyrene. These beads have a charge that is negative, attracting calcium and magnesium from the water since they are positively charged.

The attraction ensures calcium and magnesium adheres to the plastic beads as water flows through the tank. As the water gets to the bottom area of the tank, “softening” would have taken place. The “softened” or conditioned water now passes through a riser tube and outlet manifold, before it is distributed through a cold-water pipe to the house.

Over time, the resin droplets become caked with calcium and magnesium and must be “recharged” or cleaned to be as efficient as it should be. The control valve exerts some form of control in the system since the recharge process is designed to take place based on the amount of water processed. Each cubic foot of resin can efficiently eliminate calcium and magnesium minerals from about 3,200 gallons of hard water. By contrast, about 750mg of sodium is in turn added each water gallon. This sodium content is considered as low range. However, for people who are concerned about sodium intake in general, resins that release potassium is the best option – although it is expensive.

A Process Of A Brine Tank

In association with the mineral tank, a brine tank helps with the regeneration process. During the “brine cycle”, salty or brine water is pumped out from the brine tank into the mineral tank. As water passes through the plastic beads, sodium is exchanged with the ions in the hard water, regenerating the attraction of the plastic beads in the process. When the brine tank is empty, a “slow rinse process” begins, which is followed by a more forceful rinse. These two cycles allow fresh water to rinse excess salts from the mineral tank, expelling it down the drain before the brine tank is refilled.

After the washing away of the hard water ions and any excess sodium, the brine tank is refilled, returning the system back to service cycle to begin the water softening process again. Since the regeneration process allows for the dissolution of salt in the brine tank, it is important that salt is replenished from time to time.

Contact Us

At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need.  We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help!  For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.

 

Posted on by admin

Maintaining LINAC Systems with OEM Replacement Parts

Any electrical equipment that is repeatedly used will break down due to several reasons such as improper maintenance or lack thereof. They can also malfunction owing to poor electrical connections, overrunning the machine’s capability, having an untrained individual operate the equipment, including not replacing worn out parts when needed.

The Importance Of LINAC Parts

A linear accelerator (LINAC) is a very complex medical device that delivers high-energy X-rays to treat patients with cancer. Each component within a LINAC system is important, and all of them need to continually undergo rigorous, cleaning, testing, and maintenance to ensure optimal performance.

Linear accelerators Parts are very costly, and most LINAC owners often consider the option of buying a brand-new unit instead of paying for outrageously high repair parts costs, including maintenance and upkeep fees. Even though all LINAC parts have separate but vital functions, they are linked to each other and therefore, need to work in cohesion. Any breakdown of one of the parts can lead to a ripple effect that may render the whole system useless.

Cooling the LINAC Parts

The linear accelerator works by producing high energy particle beams, thus making the cooling system inclined to overheat. Depending on the model, most LINACs use a water cooling system that provides thermal stability to the system and allows the gantry and drive stand to operate at a constant temperature.

Today there are technologically advanced air-cooled chillers for LINAC cooling systems that are would probably cost more to replace a broken system. There are several independent oncology equipment refurbishing companies that have original equipment manufacturer (OEM) LINAC replacement parts, which even though they are also costly, however, once these LINAC parts are replaced, the system can continue to work like new.

The only concern when using such a complex and volatile piece of equipment is to maximize its uptime and minimizing on the overall total cost of ownership. Having said that, LINAC parts are available through the original equipment manufacturer (OEM) online or through a local dealer. The catch-22 is, do you go the economical way, such as scouring the local neighborhood depot to find the cheapest option that will work anyway, or do you stick with the original manufacturer’s LINAC parts?

Purchasing Replacement Parts

While the LINAC parts you find locally will probably serve you for a while until you can afford an OEM, but when it comes to quality, the materials will not be the same as the original. You can end up with a new replacement LINAC part that does not match up in the case of complicated parts and assemblies.

Maintaining LINAC systems with the original equipment manufacturer replacement parts also guarantee warranty coverage on each piece of equipment and in case the system fails, you can file a warranty claim provided the replacement parts that have been used match the manufacturer specifications. Using OEM LINAC parts also ensures the related components are compatible with the system, they are durable, and most importantly, they are reliable.

Learn more about Radparts and the variety of services and parts they offer to repair medical equipment including: linear accelerators parts, CT scanners parts, linac parts, and radiation oncology equipment at www.radparts.com.  To contact one of our medical equipment repair specialists for parts or service call toll free 877.704.3838 for 24/7/365 support.

 

Posted on by admin

Choosing a Medigap Plan, Enroll in Medigap

Have you just enrolled in Medicare? You may soon find out that not all costs are covered in the plan. Instead, you would be responsible for the costs not covered by the plan.

A Medigap plan is the perfect supplement for Medicare. In fact, you must have chosen original Medicare (parts A and B) to qualify to apply for a Medigap plan. Medigap (Medicare supplemental plan) plan fills some of the “gaps” and costs not covered by Medicare.

Medigap – The Choices

10 Medigap plans have been designed and they are identified by letters: A, B, C, D, F, G, K, L, M, or N. The letters are in no way a determining factor for how these plans function. However, plans A, B, K, L, M, and N have basically similar benefits while plans C, D, F, and G have same basic structures. You can find the unique benefits of these plans when you visit medicare.gov.

Who qualifies for a Medigap Plan?

Although you must have an original Medicare plan to be eligible for Medigap, not everyone is eligible. Individuals less than age 65 are not eligible in most states. A Medigap plan is a personal plan. For example, if you have purchased the plan because you are qualified, and you have a spouse that also qualifies, he or she must purchase a separate policy from yours.

Choosing a Medigap Plan

Medigap plans are regulated by state and federal laws. Generally, all plans with the same letters have the same basic benefits. However, states such as Wisconsin, Minnesota, and Massachusetts have policies that regulate the plans differently. Before you decide on the best Medigap plan, there are a few important factors you must consider.

What you can afford

Considering what you can afford means you would have to review the costs involved in the plan including coinsurance, deductible, and copayments. These plans should be reviewed in terms of the medical services you would most likely need and your budget. Most policies have low premiums with higher copayments or higher premiums with less expensive copayments. In reviewing the plans, you would be able to determine the best plan for your budget.

How much Coverage you need

Does your condition require regular medical care? Are you currently taking any management drugs? Did your healthcare provider recommend a treatment plan you must stick to for the next few months? Keeping all these in mind will help you choose a plan.

Provider’s policy

Medigap plan providers could charge based on two policies:

Community-rated policies: This policy costs every member of the group – referred to as community – the same amount regardless of the age of a member.

Issue-age rated policies: This policy is priced according to the age of the placer holder at the time of purchase. This policy does not increase over time as the individual ages.

Attained-age rated policies: This policy is priced according to the age of the policy holder at the time of purchase and could increase as the individual ages.

Choosing a Medigap plan is a complex endeavor that demands valuable amount of time, so you do not make mistakes. Ensure you are aware of the laws of your locality, stick to them, consider your medical needs, and consider your budget before you choose a plan.

Learn more about Medigap plans and rates at http://emedigap-plans.com.  Medigap Insurance brokers will help you compare Medigap Insurance rates and plans.  To talk to an expert in Medigap coverage call toll free 888-452-7949!

 

Posted on by admin

Ten Important Facts about Medicare Supplemental Insurance Plans

Are you a senior on Medicare? You probably know that the plan does not cover all the health insurance benefits you need. This is exactly where a Medical supplemental insurance plan becomes important. Also referred to as Medicare gap or Medigap coverage, it has a variety of benefits that supplements the costs that Medicare does not cover. Here are ten important facts about Medicare supplemental insurance plans.

Medicare supplemental plans are standardized

Medicare supplemental plans are standardized. This means that each plan that begins with the same letter (with designated letters A to N) must have the same basic benefits, irrespective of the insurance company you purchase the plan from. However, different insurance companies determine their pricing independently.

Medicare supplemental insurance plans cannot be combined with certain health insurance types

Medicare supplemental plans were designed to work with Original Medicare (parts A and B). If you have another type of insurance, purchasing a supplement plan from a supplement plan from an insurance company may be illegal.

Medicare Supplement plans do not cover all medical benefits

Benefits such as Part A and B deductible, Part B excess charges, skilled nursing facility care coinsurance, and foreign travel emergency are covered up to 50% by some Medicare supplement plans. On the other hand, benefits such as Medicare part A coinsurance, part A hospice care copayment or coinsurance, part B coinsurance or copayment, and the first three pints of blood are covered by supplement plans to at least 50% and it could be up 100%.

Medicare supplement plan is best bought when you are first eligible

Although Medicare supplement plan can be bought anytime, you could be subjected to medical underwriting which would allow insurance companies gather information about your medical history. This history – past or present – could be used as grounds to either charge you more for a plan or reject your application. The Medicare Supplement Open Enrollment Period is the best time for purchasing a supplement plan. During this time, you would not be subjected to a medical underwriting by insurance companies. This period lasts for six months beginning from when you are 65 or older.

You must leave your insurance plan to enjoy a Medicare Supplemental plan

If you already have another insurance plan such as a Medicare Advantage plan, you must leave the plan before the Medicare supplemental plan begins.

A Medicare supplement plan is for one person

If a holder has a spouse that qualifies for a Medicare supplement plan, he/she will have to purchase a separate policy.

Consumers pay a premium

Medicare supplemental insurance plan consumers pay the insurance company a monthly premium for the policy. This is in addition to the Part B premium that a policy holder must pay to Medicare.

Medicare Supplement plans no longer cover prescription drugs

In the past, Medicare supplemental plans had prescription drug coverage. However, since January 1, 2006, such coverage has been disallowed. For consumers who need such coverage, they can purchase the stand-alone Part D also referred to as Medicare Prescription Drug Plan.

It is illegal anyone with an MSA to sell a Medicare supplemental plan

If anyone has a Medicare Medical Savings Account (MSA) Plan, it is illegal to sell a Medicare supplemental plan to a consumer.

Medicare Supplemental Plans are guaranteed renewable

So long as a consumer continues to pay the premium, no insurance company can cancel a Medicare supplemental policy even if the consumer has medical issues.

Learn more about Medicare Supplemental Insurance plans, rates and more at http://www.emedicare-supplemental-insurance.com.  Medicare Supplemental Insurance brokers will help you compare Medicare Supplemental Insurance rates and plans.  To talk to an expert in Medicare coverage toll free 877-202-9248 today!

Posted on by admin

The Role of Trucking in Logistics Business

Logistics encompasses a combination of production and the delivery of a product or service to ensure efficient and effective management of various warehouse and distribution companies. Logistics management matters because it controls the flow of supplies to match the needs of the manufacturer with the schedule of sales to customers. It also coordinates the flow of information in terms of delivering feedback about sales, financing, and the delivery of product from various suppliers.

Trucking, on the other hand, involves the research and planning of trucking operations and considers all the factors involved in the transportation of goods by trucking companies with the goal of maximizing productivity and efficiency. In trucking logistics, distribution companies analyze trucking routes to improve efficiency through the reduction of delivery times including putting into consideration the type of load being transported to determine the best shipping method of goods.

Depending on what you want to transport and where you have the following services to choose from:

Just-in-Time Truckload (JIT)

This freight forwarding service specializes in the transportation of oversized goods on flatbeds, multi-axle trailers, or step decks. The Just in time truckload services includes same day land delivery in a local area or air freight services that can either be same day or next day. JIT transportation services are location-specific to ensure that a client’s shipment arrives at its destination on time, hence reducing storage and inventory cost while allowing customers to track their products in transit.  3pls prefer the Just in time truckload method because there are minimal inventory levels, which makes it cost effective as it minimizes the number of consignments a client can hold at a time. The turnaround of stock is equally fast, which also minimizes the risks of damaged or stolen goods.

Full Truckload Shipping (FTL)

Full truckload shipping is a cost-effective and practical solution for any large domestic shipment especially for time-sensitive, delicate or high-risk freight because the goods stay in the same truck during the entire journey. Full truckload shipping is a faster and safer method of transportation where companies dedicate an entire truck to a single client, regardless of the weight or size of the shipment. There are no stopovers, and the goods are not handled en route until they reach their destination. This minimizes the chances of mishandling or damaging the consignment.

Less Than Truckload shipping (LTL)

This shipping solution has several advantages as well as disadvantage. Less than truckload is cost-effective because clients only pay for the space they use rather than paying for the entire trailer as they would with FTL. The downsides are, shipments are handled several times through the duration of transit and often change trailers several times before reaching the destination. As a result, shipping companies must spend additional resources on the packaging of a product to minimize the potential for damages. Consignments in the Less than truckload method also does not come with guaranteed delivery unless requested, which increases shipment costs.

Learn more about Matrix Transportation and the transportation services they offer including: dedicated truckloads, JIT truckloads, less than truckload (LTL), same day expedited FTL and LTL, full truckload, warehousing, cross-docking, and trailer rentals at www.matrixtransportation.com  To contact one of our trucking experts call toll free 888.896.2405 today.

 

Posted on by admin

What Should You Avoid When Buying Refurbished Electrical Components?

Opting to buy reconditioned or refurbished electrical components has many benefits some that only your wallet can thank you for. Provided the reconditioned electrical components performs as they should, buying a used item for a lot less saves you quite a chunk of change, especially when it’s not financially feasible to buy a new electrical component. There are, however, certain risks involved in buying refurbished electrical components, particularly when you don’t know what to look out for.

You may start by asking yourself why the owner of said refurbished electrical component is selling the item(s) to begin with. The price might be right on the scope of your budget, but you might end up inheriting a costly problem that you have to contend with until you can re-sell it or buy another one altogether. You also may need to keep in mind that it might be hard to find spare parts of a used electrical component, which may also cost you an arm and a leg to have them repaired. Consider the following things that you certainly must avoid when buying refurbished electrical components:

Reputable Source

You finally find the component you have been looking for, the price is right, and it’s just a click away. But wait, with so many counterfeit parts available out there, how do you know that it is the real thing? When buying refurbished electronic components always look for a trusted source and crosscheck certain things such as how long they have been in business, including feedback and reviews from past customers, which ideally should be mostly positive because, well, you can’t please everyone. Reconditioned or refurbished electrical components that can be traced back to the manufacturer are probably ideal to purchase.

 Cosmetic Imperfections

This should go without saying that a visual inspection of a reconditioned electrical component is of great importance. Even when being sold by a retail trader as “new old stock” or “used,” the electrical component should be in its original packaging where packaging is applicable even if the packaging shows a little shelf wear and tear or possibly opened. The electrical component should be cleaned, inspected and deemed fully operational within the manufacturer’s specifications even with noticeable cosmetic imperfections, such as paint wear or product scratches.

Refurbished electrical components will not always be in their original packaging. However, they are Okay to purchase provided they have been repaired by the manufacturer or manufacturer’s authorized service, they meet with all the manufacturer’s specifications and is in excellent condition

Missing Information

Do not buy a refurbished electrical component from an advert that doesn’t give you all the key product specifications, including how long it’s been used, its accessories, illegible labeling, the warranty if applicable, as well as the return policy, etc. Whoever you chose to buy from should also be able to answer all your questions to ensure that you can get your money back if the refurbished electrical component doesn’t work as it’s supposed to.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

Posted on by admin

Eye-Catching Kitchen Cabinet Details You Will Want to Use In Your Kitchen Renovation

Kitchen and bathroom renovations are the in-thing and for good reasons. There are stunning kitchen cabinet designs that you will love to have for your kitchen’s new facelift. If your kitchen’s layout works for you, you do not need to spend thousands of dollars for a complete kitchen remodeling. Instead, work with a licensed contractor to design your kitchen improvements to keep some of what you have and replace the cabinet doors or fronts depending on your budget.

Glass Kitchen Doors

Glass is very versatile and can be used in almost any part of the house to create a luxurious feel. You want the help of a licensed contractor to help you chose a high-quality glass so that it remains flush with the cabinets for its entire lifetime. Instead of leaving the doors bare, your contractor can add an X-design on the front to give it a sophisticated look and finish.

Copper, Brass, and Bronze Cabinet Handles and Faucets

Warm, soft shades of brass, burnished copper and hammered bronze are all the rage right now and has recently appealed to designers as a modern interior trend. These elements are a fantastic alternative to traditional fittings. The good thing brass matches with any color, making it ideal for a kitchen, and because it is reflective, it will make your kitchen look bigger. Brass and copper add an earthy feel to a kitchen when used on the kitchen islands, cupboards or stovetops, plus cleaning is a breeze.

Metallic Screen Doors

The metallic screen door pattern can either be of chrome, aluminum, bronze, or brass and can be used on the doors to add a touch of luxury and to let the cabinets breathe while at it.

Cabinets with Exposed Hinges

If they are not too busy looking for your space, exposed hinges give a period feeling to any kitchen. Imagine white or brown wooden cabinetry with rustic, or black exposed hinges.

Modern Minimalist

Think clean lines, muted monochrome colors, and minimal embellishments.

Under-Cabinet Lighting

Installing lights inside your cabinets is not only functional, but it also enhances the décor, saves energy, and brings about a soothing ambiance.

Backsplash

A kitchen is not complete without a modern backsplash that will fit in with your cabinets and transform your entire cooking space. Backsplashes come in a wide variety of colors, styles and materials such tile, stone, glass, ceramic, that extend from the countertop to the ceiling to lend a contemporary look and warm up a sleek, contemporary space.

JFC Remodeling, out of Howell, Michigan, offers a variety of construction services for the home including: kitchen and bath remodeling, flooring renovations, and home remodeling.  You can find out more information at http://www.jfcremodeling.com or by reaching out to our home renovation specialists at 810.923.1123.

 

Posted on by admin

Choosing the Best Fence Style and Color For Your Home

Choosing the best fence for your home can seem like an impossible task, especially with the gamut of fencing options available in the market today. However, if you have your heart set on an aluminum fence, half your job is done. All you need is to determine the style and fence color you want for your fence.

Aluminum railings are covered with a highly durable powder coating that is corrosion and weather-resistant during the manufacturing process, you can ask an aluminum fence manufacturer to customize your railing with a variety of colors that will suit your needs. Does a bronze, silver, gloss white, sandy shore, bronze, speckles walnut, or clay-colored aluminum gate appeal to you?

Steps To take For a New Fence

First things first, are there any developmental standards and bylaws that apply to the fences in your neighborhood? The last thing that you need is to be asked to pull down your new fence or rebuild it because it does not meet a specific requirement. Therefore, talk with your neighborhood’s HOA, city council, even your local aluminum fence company to learn about the bylaws in your area. Also, if you share a fence with your neighbor, it’s only fitting that you talk to them first before you decide to paint or alter the style of the fence.

What Is Your Home Style?

Next, what is the style of your home? Is it farm-style, traditional cottage, or contemporary? Traditional, farm and cottage-style homes are suited with white dog-eared or pointed picket fences, but that doesn’t mean that you should only conform to the norm. You can pick between a satin black or gloss white 3 – 6’’ in height aluminum fence, with either pinched points rails or double picket style with pinched point pickets between two top rails. There are beautiful aluminum fence colors and styles for modern, architecture and contemporary-style homes such as aluminum fencing infills slat screens that are easy to install.

Blending Surroundings With Fencing

When it comes to selecting a color for your aluminum gate and overall fence, consider choosing a color that blends harmoniously with the natural surroundings, gardens, and landscaping. Not only does the right color fence help in making a great first impression from the front of your home, but it will also enhance your home’s curb appeal and potentially boost its resale value. Even without using “screaming colors,” your home can still look appealing if you use the same color as the trimmings around your house or the undertones in your garden. Simply put:  choose a fence color that blends in well with your surroundings.

Be on the lookout for wholesale aluminum fence panels to get a bang for your buck and consider installing one or two aluminum gates depending on the size of your property for safety and esthetic purposes. Your perimeter fence and security aluminum gate will offer protection and create safe enclosures to areas where you do not want pets or children to venture into unsupervised such as the garden or pool area.

iFenceUSA is an online manufacturer and distributor of wholesale aluminum fencing. With over 18 styles of aluminum fence panels and gates to choose from, we have aluminum fences that will meet your wants and need.  Choose from custom aluminum fencing options including: Commercial Grade Aluminum Fencing, Residential Grade Aluminum Fencing, Pool Grade Aluminum Fencing, and Industrial Aluminum Fencing all at https://ifenceusa.com/.  For more information contact one of our aluminum fence experts toll free 800.762.2907 or via email at info@ifenceusa.com.

 

Posted on by admin

What an IT Consultant does for your business

Information technology plays an essential role in the business plan of an organization by improving productivity, creating opportunities, and refining customer-business interactions. Most businesses make use of internal talents in their company to take charge of installation and management of new technology. Since most professionals have basic IT training, this strategy may prove to be effective. However, an IT consultant with specific skills may be required in some situations to implement detailed processes so your business can remain at the top of the game.

Cost Effective

A commercial IT consultant can prove to be effective in the long run especially for startups. Hiring a permanent IT consultant can be really expensive since the expert will be on your payroll even when there is no major need for his/her skill set. Since a business may not need highly skilled IT services every month, hiring a commercial IT consultant to install a new technology and train employees on how to use it would prove to be effective for the growth of your business.

Data Security

Technology is constantly advancing and so is the need to continually update the data security of your business systems. Adopting a new business technology can prove to be a challenge especially when there are no IT experts to handle such system. When you hire the services of a commercial IT support, they will take care of the data security of your new technology, advise you on the best and safest technologies specific for your business, and identify and potential loopholes that could compromise the security of your technology.

Improving Customer Service and Enhancing Productivity

Customer satisfaction is a priority for every business owner. Hence, it is very normal for them to look out for new ways to continually improve the customer service of their business. Modern technologies make communication between businesses and customers to be very easy and efficient, thereby improving productivity. With the advent of new and improved technologies today, an IT consultant is best placed to advise your business on the technology that best fits your service. This conclusion is arrived at after studying the nature of the business, the target market, and the number of users.

Technological Crisis

Over time, systems may experience technical issues. Some may be easily handled by the internal IT staffers, while others may prove to be too challenging. In cases where a natural disaster affects your business technology or hackers breach the business system, the internal IT department may find it pretty difficult to take charge of the situation. Hiring an IT consultant support is a no-brainer in such cases. They will help you resolve the issue, restore normalcy, and even do their best to prevent such mishap in the future.

Whether your business is a small or large one, IT consulting is beneficial for the handling of technical tasks. It would never be ideal to wait until there is a technology crisis in your business before you invite an expert.  When you call for the services of an IT consultant to conduct checks regularly, your systems will be in top conditions at all times.

Learn more about Creative Programs and Systems, CPS, and the IT solutions they provide including IT consulting, computer consulting, network consulting, networking, server installation, IT disaster recovery, computer repair, virus removal, malware removal, computer tune ups, data backup systems, computer troubleshooting, structured cabling, low voltage wiring, website design, graphic design, logo design, website hosting, search engine placement, iphone app programming, android app programming, and custom programming at www.cpsmi.com.  To contact one of our IT experts call 810.224.5252 today or via email at info@cpsmi.com.

 

Posted on by admin

5 Ways A Realtor Makes Buying A New Home Easier

A DYI house hunting project may seem like a good idea at first. You have a few ideas of what your dream home should be, so you decide to enlist a friend who knows your personality, your style, likes and dislikes, etc. You have a camera and measuring tape in hand, comfortable shoes on, but it dawns on you that you don’t really know where to start.

Buying a new home can get very emotional and challenging to say the least. It helps to have a realtor working on your behalf to simplify the process and to answer some tough questions that often surface. Consider the following ways a realtor can make buying a new home easier for you:

Neighborhood Knowledge

No one knows a local area better than a realtor, whom among other things, has reliable pricing information, they know why a neighborhood has a high distressed rate including neighborhoods that can suit your price range. Only a realtor can narrow the focus to the top two or three homes for you to consider within minutes.

Code of Ethics

If your realtor is a member of the National Association of Realtors (NAR), he or she will make a full disclosure of any problems with a property and be truthful when advertising it. They know that giving you false or misleading information when you are trying to buy a new home may lead to a hefty fine and a year’s suspension or a three-year expulsion from the association.

Finding Available Homes

Some homeowners want to sell their property privately due to financial difficulty, health issues, or from a divorce matter that needs privacy. Such homes are rarely advertised on websites, and sometimes they sold for a lot less. Working with a great realtor can give you access to homes you might otherwise miss on websites.

Pricing Expertise

Realtors have the experience to know whether a specific home is overpriced or underpriced. They can provide you every relevant information on all the houses on sales that you want to see and will advise you on how well a neighborhood holds its value through their years of carrying out various transactions in different neighborhoods.

Assessing Repairs and Handling Paperwork

Once you have your eyes set on a home, a realtor can recognize a few things that you may not see that need upgrading or repair and they can recommend a reliable home inspector who will provide a detailed report on problems with the house before you make an offer. They are also able to help you determine which of the repairs are worth spending money on and which you can comfortably live with.

A realtor will save you a lot of time and headache of finalizing all the necessary documentation. Thanks to their years of experience, they know the paperwork inside and out, and they remain levelheaded in tough negotiations.

Learn more about C21 Lady of the Lakes Realtors and the numerous services they offer including: buying a new home, selling a home, or renting a home at www.ladyofthelakes.com.  To contact one of our real estate agents call 734-426-6060 today.