Why You Should Test for Lead in Your Water

Over the past several years lead in water has become a hot issue amongst homeowners, especially after the events and discovery of lead in Flint, MI water systems. Lead in your water can be a very big issue for not only you and your family but your home as well. No matter how old or new your house is, no home is truly immune to the effects of lead in water, although older homes with older plumbing systems are more susceptible than newer, more modern homes. The effects of lead in the water are the same across all instances, however, and having a proper understanding of them can help you and your family better prepare yourselves if you find yourself experiencing this troubling issue.

Your Home

As mentioned, homes with older plumbing systems can be more susceptible to having lead contaminates in the water. This is because the pipes themselves experience natural corrosion over time, and thus experience a higher probability of contaminates getting through as these pipes age and deteriorate. It benefits both your home and your family to consistently replace the piping of a home over the course of your life to ensure the pipes you don’t see aren’t causing health issues for your family. This is also beneficial to ensure the pipes don’t deteriorate too much to a point where damage is caused in your home by water leakage, which can cause even more damage that can get very expensive to fix.

You and Your Family

Lead in your water can be an invisible issue that may go unnoticed for years until very visible damage is caused to your family’s health. While every member of a family can be negatively affected, infants, young children, and pregnant women are the highest risk for visible health damage. According to a HealthyChildren article, infants drinking formula prepared with lead-contaminated water can be at an even higher risk due to a large amount of water consumed relative to body size.

Concerned parents can have their local pediatrician test their children for lead deposits in their blood so parents can be on top of their children’s health. Because lead in water cannot be seen, tasted, or smelled, having your child tested is the only way to confirm lead in your water. Once that is done you can take the necessary steps to replace the piping in your home or install the proper equipment to better the quality of your water.

The experts at Reynolds Water Conditioning have a solution to your home’s unique water quality needs including arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Why You Should Have A Water Filtration System

Without water, we could not live so it’s easy to see why choosing the best source for the cleanest water is an important decision to be made. Industrial chemicals, heavy metals, and pesticides are found in water supplies all over the world and it is up to us to protect ourselves and our families from the pollution we can potentially put into our bodies. The good news is there are many affordable options that are available to produce and improve water quality.

Knowing You Water

The first step to improve your water quality is to know exactly what type of water you are currently dealing with. There are several ways that water testing can be performed some more accurate than others. The most simplistic form of testing is by using your senses of sight, smell, and taste. With sight, you may notice cloudiness or particles that float or if the coloring of red, brown, or orange it could indicate rust from corroded pipes. As for the smell, certain aromas will inform you of chemicals that are in the water such as bleach type which could be chlorine from the local facility. Or perhaps you smell rotten eggs, and this may indicate somewhere through the water’s course there is bacteria growth. Lastly with taste, if the water instantly doesn’t taste normal it is best to never swallow it. The next option for water testing is to have a professional water treatment company to test your water supply or purchase an at-home water test kit. These tests can determine if the water contains harmful materials and reveal the water’s pH and hardness. If your water source is from a private well, it is advised to have the water tested twice a year.

Water Filter Options

Water filters come in a variety of shapes and sizes and each one has unique features that will benefit a home differently depending on your water quality needs.  The first question to ask yourself is what impurities are you wanting to remove from your water? After reviewing your water quality report or speaking to your professional water treatment company, you can decide what type of filter you are needing to use.

  1. Pitcher filter- The simplest water filters to use that fit inside a pitcher that can be kept inside the refrigerator. This style is inexpensive and easy to use but the lifetime is short and typically only removing few contaminants such as chlorine from the water.
  2. Faucet mount filter- this style is exactly as its name implies and is located directly under your faucet. They require little installation with easy replacements and are an inexpensive option. These filters can remove a decent number of contaminants but be sure to research what exactly it can remove to be safe.
  3. Countertop filters- These filters will not take up space under your sink but can however clutter your countertops. They work best for filtering large amounts of water without having to modify any plumbing. Installation can be done hooking to your faucet or be freestanding as well. An advantage is they do not clog as often as a faucet-mounted system but are not compatible with all types of faucets either.
  4. Reverse osmosis– A process where water is forced through a membrane that filters molecules that’s are physically larger than the water molecules. This type of filter is very well at removing minerals however it cannot remove chlorine or volatile organic compounds which are more of a cause for concern so many ROS systems combine prefilters and carbon filters to help this issue.
  5. Whole-house filters- This type of filter is installed directly in the water main and filter all water coming into the home. An advantage is they have a long lifetime and are an inexpensive option for removing sediment, rust, and sometimes even chlorine. Unfortunately, they can not remove most other contaminants, so it is important to pair this with another drinking water filter. They are on the pricier side in relation and must be installed by a professional water treatment company.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Salt Vs Salt Free Water Softeners

A recent debate that is brought up often after water softeners are which systems are better, the salt based or salt free softeners? Several factors will need to be considered when answering this question. In this installment we will look at how both systems work and what advantages/ disadvantages of each to understand which system is best suited in a certain situation.

Salt Based Water Softeners

Taking a closer look at how these products work, these systems are designed to remove hard water minerals like calcium and magnesium from your water which than provided soft water. This process of hard water removal is done through “ion exchange”. Salt based softeners require the use of salt pellets and regeneration periods or a recharge cycle. As a result, these systems will prevent scale buildup, reduce future staining on appliances and laundry, and personal hair and skin softness. They will ultimately save you money by prolonging the life of your water base appliances and use less soap/ detergent when cleaning. If your home has high levels of hard water, this type of softener will be your best choice for your concerns.

Salt Free Water Softeners

Despite their name, salt free water softeners do not soften hard water. They work by crystallizing calcium but does not remove it. Salt free water softeners are more specifically a water conditioner that prevent the hard water from adhering to the surface of an object such as the inside of your water pipes. An advantage of using this type of water softener/ water conditioner is that they do not waste water the same way as traditional softeners. They are also less expensive to operate and require less maintenance. This method of hard water treatment is not as effective as a salt-based system and will not be able to remove high levels of hard water.

Choosing Potassium Chloride

A third option that can be done to remove your hard water issues but will remain on the healthier side would be soften water by using the alternative of potassium instead of sodium. Potassium is an essential mineral that provides good health to people and to the environment. Water conditioning units at Reynolds Water are designed to use potassium just as well as the use of sodium. Simply change the product by changing to a different bag option and your set.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Types of Salt for Your Water Softener

As a home owner, certain appliances will need to be maintained in order to keep your house running efficiently including your water softener. Regularly, the salt supply will need to be replenished in order to keep hard water from coming into your water system. While out shopping, you may find yourself questioning what the best choice for salt is exactly to purchase since there is a variety of choices to choose from. In todays article we will discuss the difference between the salt options and help you decide which choice is best for your softener and home.

Sodium Chloride Options

Water softeners or conditioners can be used with either sodium chloride (most commonly called salt) or potassium chloride. When at your local grocery store or home improvement store one thing to keep in mind when looking at the bags for purchase, its important to notice the purity levels. Many of the bags sold in these places will contain high level of water insoluble material. This impurity over time can cause buildup in the water reservoir or cause the water softener to not function properly. If you notice this buildup occurring, the brine tank will need to be cleaned more often to avoid this from happening in future. A closer look at sodium chloride and you will see there are 3 different forms to choose from: pellets, crystal, or block salt. Salt pellets are the most common and typically are the less costly than potassium pellets. Like many things found in the consumer world, spending a little more money upfront for higher quality products is well worth the expense since this typically will mean less maintenance and fewer cleanings needed to keep your softener functioning efficiently.

Potassium Chloride as Alternative

If sodium chloride doesn’t seem to be the right fit for your homes needs, the alternative option can be potassium chloride for your brine tank. Potassium chloride is 99.9% sodium free, so this option is great for individuals who are looking to decrease their sodium intakes. The largest disadvantage with this type is the price tag attached is much higher in comparison to sodium chloride. It can also be less readily available when searching at your local stores and your options are smaller. Switching your home form sodium to potassium may require an increase of salt dosage on the program settings value by an extra 10% to guarantee proper regeneration. If needing assistance with this, Reynolds Water Conditioning technicians can assist with this.

Salt Maintenance Tips

Checking your salt level inside your brine tank monthly is recommended. If your system regenerates more frequently, more checks and salt refills will need to be done more often as well. The salt in the brine tank should be at least 3 to 4 inches above the water level, but less than 4 inches below the top of the brine tank for best efficiency. If regular checks on the salt levels are performed you will begin to have non conditioned water through the household and will notice hard water by orange appearance, smells and taste different from before. Be sure to loosen any hardened salt around the edges of the tank or any large solid masses also known as salt bridges before adding additional salt each time.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Basic Water Softener Maintenance

Maintenance and service on water softeners is pretty basic when it comes to the world of appliance upkeep.  The exception to this, however, is the initial installation of the water softener.  Determining the water hardness level, regeneration timing parameters, salt to use, and when to refill the salt so the softener can perform properly can be a bit tricky.  Proper water softener set up can make long term maintenance easier and the softener perform more efficiently and last longer.  

Ongoing Maintenance – Tips for Residential Water Softeners

Avoid Salt Bridges

Salt bridges occur when an empty space is created in the brine tank between the water and the salt.  This prevents the salt from dissolving in the water which is how brine is made.  Without brine the resin beads that soften the water are unable to do their job. 

The most common cause of bridges are high humidity, temperature changes, or using the wrong type of salt.  Salt bridges make it appear that the salt in your water softener tank is full.  Your water, however, will be hard because the salt is not dissolving to make brine.  To remove a salt bridge, use a long handle and slowly push the top of the salt downward.  A little bit of pressure is all that is needed to break up the solidified salt.

Prevent Salt Mushing

Salt mushing is more serious than salt bridges.  This occurs when the salt dissolves and then recrystallizes to form a sludge on the bottom or the brine tank.  This thick layer of sludge keeps the softener from cycling properly during the regeneration process.  Hard water remains and a serious blockage is created in the tank.  If you attempt to remove a salt bridge and it does not break up, salt mushing is probably the cause of your hard water problem. The only way to fix the issue of salt mushing is to drain the softener of all water, remove the old salt and sludge, and replace it with fresh salt. 

To prevent both salt bridges and salt mushing it is important to use high quality salt products as they greatly reduce the potential for problems.  Also, it is important not to overfill the brine tank with salt.  Keeping it only half-fill will prevent older salt from sticking to the walls of the softener tanks.  Preventing humidity around the water softener can also help. An environment with high humidity can lead to condensation in the brine tank which will cause salt to bond together.

Water Softener Salt

In choosing salt to use in your water softener you will be able to choose from rock, solar, and evaporated salt.  Rock salt is the cheapest however contains the highest level of insoluble minerals.  When this occurs, the result is a muddy tank which decreases the softening efficiency and leaves impurities in your water.  Solar salt is more soluble than rock salt.  Solar salt is obtained through the evaporation of sea water and is found in crystal and pellet form.  The best option for salt to use in your softener is evaporated salt.  This is obtained through the combination of evaporation and mining.  Solar salt is 99.99% sodium chloride and is the purest form of salt.

Salt with high levels of purity leave less residue thus lower the likelihood of salt bridging and mushing.  Purer salt results in less maintenance and high-quality salt in pellet form helps to eliminate bridging issues. Water softener salt delivery allows you to order top quality salt brand products that address specific issues such as high concentrations of iron, rust stains, and salt free alternatives like potassium chloride. 

Resin Bed Cleaning

Resin beads are routinely recharged by salt, but this doesn’t mean that the resin bed shouldn’t be flushed every few months with a cleaner designed for water softeners every few months to keep it in top shape.  Water softening units can become polluted with iron, silt, metals, and a variety of different organic compounds which decrease your softeners efficiency.  The process to reduce the ineffective resin is fairly simple.  You will pour the manufacturers recommended amount of cleaner down the brine well and manually regenerate the water softener.  The cleaner will be discharged during the normal flushing process during the softening cycle.  This action cleans the resin and helps the absorbency of calcium and magnesium.

Clean the Venturi Valve

The venturi and nozzle work to create suction that moves brine from the brine tank into the resin tank during regeneration.  Sometimes this valve can become plugged up with sand, sediment, or dirt.  A clean valve is imperative for water softening to occur properly.  This can be accomplished by unscrewing the cover of the valve, removing internal parts, and cleaning them all with soap and water.  Completing this process twice a year will help keep the process running smoothly and more efficiently. 

Periodic maintenance, regular upkeep, and monthly checkups all prevent major incidents from compiling and affecting the quality of the water running through your home.  Hard water leads to major expenses, like new appliances, plumbing issues, and more, when left untreated. 

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

What Do I Need to Know Before Purchasing a Water Softener?

There are several different options when it comes to treating the water in your home.  The decision on whether you choose to install a water softener, water conditioner, reverse osmosis system, water purification, or water filtration system all comes down to the quality of the water from your tap.  Depending on the minerals and contaminants that are in your water the treatment option chosen for installation will vary.  Below are the most commonly asked questions surrounding water softeners and water treatment options.

What is hard water by definition?

All water naturally contains minerals such as calcium and magnesium that dissolve in it.  Water that contains more than one grain of a combination of minerals is considered to be hard.  To determine what level of minerals can be found in your homes water bring a sample from each faucet into Reynolds Water Conditioning Co

What should concern me about having hard water?

One of the biggest concerns when it comes to having hard water is the scaling that occurs in pipes and fixtures.  Scaling occurs when water is heated and minerals re-crystalizing.  These scales then get into appliances that use water such as the washer, water heater, and dishwasher decreasing its lifespan.

Another issue made worse because of hard water is soap scum in showers, on your hair, skin, and even clothing.  Soap combined with hard water forms a scummy substance that accumulates.  Even after rinsing thoroughly soap scum deposits are still present.

Why do I need to soften the water in my home?

When your home has hard water, the installation of a water softener can often help.  Soft water is beneficial for a variety of reasons.  Not only does it prevent scaling, but it also allows you to use less detergent, reduces spotting on fixtures and dishes, helps to increase the longevity of appliances, and more.

Are there reasons I should not use a water softener?

If you are on a low sodium diet, you will want to consider a water softener alternative. Water softeners use a process of ionization using salt to soften hard water. Salt ions attract hard water minerals and deposit them on the water softener resin (simply put of course). Basically, the salt ions and mineral ions trade places with one another which is why the soft water contains extra salt. 

Do I need to soften water outdoors or on my ice maker?

Yes, the water in your ice maker should be softened prior to making ice.  Softened water does not leave scale deposits which water that has not been softened does. 

Irrigation systems are a personal choice.  If water is left untreated there is a high potential for outdoor staining to occur.  Hard water deposits minerals such as iron on to landscaping, siding, and outdoor furniture which overtime discolors the materials. 

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Stain Control for the Rust In Michigan Irrigation Systems

Rust is a common element in water that is flowing through Michigan irrigation systems.  One way that homeowners can ensure that this rust doesn’t cause staining to outdoor furniture, landscaping, or siding is to install a water treatment system that offers irrigation stain control.  Reynolds Water Conditioning Company offers a system that is designed specifically for this purpose.  In these systems a concentration of a bio-degradable solution is injected into the irrigation stream as it enters the irrigation system.

Irrigation stain control water treatment systems help to prevent the formation of rust and red water staining outdoors.  The solution that is injected into the water is safe in preventing stains without harmful acids and chlorides.  Not only does the solution prevent staining it protects against corrosion, pitting, and plant life damage. 

Now that we know how we go about preventing future staining it is important that we remove the rust stains that have already formed.  Landscape rocks are one of the most versatile materials that can be used when creating a natural space.  When rocks are exposed to the elements a natural unattractive red staining can occur.  It can come from the rust in the irrigation water and from a chemical reaction between irrigation water and iron that can be present on landscape rocks.  Most stains can be removed by using an oxalic acid bath or a combination of powdered clay and liquid rust remover.  There are also a number of over the counter products that remove rust all of which can be found at local hardware stores

Cleaning Small Landscaping Rocks

To safely clean your landscaping rocks first removal the built-up dirt and debris. Place larger rocks in a bucket.  Put on some rubber gloves and safety goggles combining one gallon of distilled water with one pound of oxalic acid crystals.  Mix carefully with a wooden spoon until crystals are dissolved.  Pour the solution slowly over the landscaping rocks to avoid splashing.  Use enough solution to cover the rocks.  Let this sit until rust no longer remains.  Add baking soda slowly to the oxalic mixture to neutralize it.  This will cause the mixture to bubble and foam up.  Once this process stops you can remove the rocks from the bucket with rubber gloves.  This mixture can be disposed of down the drain.  Rinse the landscape rocks with a garden hose. 

Cleaning Large Landscaping Rocks

Rinse landscape rocks with a garden hose.  Put on rubber gloves and mix rust remover with powdered clay to make a thick paste.  Apply a thick layer to the stains with a spatula.  Allow the paste to sit for 24 to 48 hours.  Cover with plastic wrap or a large tarp to allow the paste to dry completely.  Once the mixture is dry you can scrape it off with a plastic knife.  The rocks should then be washed off with a garden hose.  If rusts or stains remain the process can be repeated. 

Tips for Cleaning Rust

  • Test the acid solution/paste on an area of hidden rocks before cleaning the lot.
  • If the paste leaves marks on the rocks use a wet cloth and polishing powder to buff them out.
  • Always wear rubber gloves and eye protection.
  • Work carefully to avoid splashing on your skin.
  • Use caution to prevent breathing in dust from the oxalic acid and removed paste.
  • While cleaning keep pets and children away from the area.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditionerswater filtration and purificationreverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Well Water: Removing Iron from Your Homes Water

There are many issues that can affect your homes water with the two most common being hard water and increased iron levels.   Using the correct water filtration system, iron can be removed from your well water in a simple and efficient manner.  Water treatment systems such as water softeners and water filtration units are most often the ideal choice for homeowners looking to remove iron while reverse osmosis units are more ideal for the removal of harmful minerals and other substances.  Your homes water must be analyzed before homeowners can determine what water treatment option should be installed to properly treat their unique water supply.

 

As mentioned above, if your homes water is affected by iron the two best options in treating your water are the installation of a water softener and/or a filtration unit.   When a water softener is installed it is important for the homeowner to know what minerals are in the water.  When an excess amount of iron is found in the water it is important that the water softener that is installed that exclusively removes iron from the water source.  Water softeners use a process in which iron in the water is replaced with healthier minerals.  The drawback is that if the water also contains more harmful materials such as arsenic or sulfur a water softener may not be the right choice for treating your water supply.

 

If you are restricting your sodium a water softener that uses potassium chloride will offer you similar results without the use of salt.  Other methods of removing a high iron content from your water are oxidation filtration and reverse osmosis.

 

Oxidation filtration is used to not only remove iron from your water but also arsenic.  Oxidation filters are more powerful than water softeners and therefore chemical elements such as arsenic are removed when they are used to treat your water.  An oxidation filtration system can also help homeowners who have a problem with water that smells like rotten eggs or a unique flavor, both caused by sulfur in the water.  Increased arsenic levels are common in well water.

 

Another option as mentioned above is a reverse osmosis filtration system.  RO filters are used in water that has a number of different trace mineral elements including: iron, salt, arsenic, fluoride, lead, and manganese.   The one drawback of using reverse osmosis when treating your homes water supply is that not only does the process remove harmful minerals, it can also eliminate good minerals, such as calcium, that is naturally in your water.

 

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Water Softeners: Maintenance Made Easy for Homeowners

Water softeners are just one of the many appliances that make our lives better.   Once the softener has been installed there is little that needs to be done for it to do its job effectively day in and day out.  Once the initial water hardness level has been set, regeneration parameters are set, and the salt is filled (or potassium) the softener will run as intended without a lot of attending too.  Even though they are low maintenance appliance within the home they do require general maintenance to increase longevity and effectiveness, as do most appliances around your home.

Tips for Maintaining Your Water Softener

Keep an Eye Out for Salt Bridges

Salt bridges can occur in the water softeners brine tank when the salt hardens, creating an empty space between the water and salt which then stops the salt from dissolving and making the brine.  If the brine is not created, then the resin beads that are used to soften your water will not work as intended.  Most often a salt bridge occurs if the salt used in the tank is the wrong kind, in areas with high humidity, or when the water softener is stored in a location where the temperature varies.  The best way to treat a salt bridge is to use a long piece of wood to carefully push down on the top of the solidified salt.  This should, without a lot of force, break the bridge that was created in the salt free.

Watch for Salt Sludge

Salt sludge is a more severe issue that a salt bridge.  When the salt dissolves and recrystallizes, a mush is created on the bottom of the brine tank.  This layer of salt on the bottom of the tank keeps the system from regenerating properly which will leave a blockage in the tank that doesn’t allow the water to properly soften.  The only way in which to solve the problem of salt sludge is to completely clean out the brine tank by digging out the used salt and adding fresh salt.

The best way to avoid salt bridges and salt sludges are to use the highest quality salt pellets available.   Also, avoid putting too much salt in the brine tank, overfilling the tank will decrease the quality of the water that is produced.  It is also crucial that the humidity and temperature in the space where the water softener is kept.

Water Softener Salt Choices

When it comes to maintaining your homes water softener, as mentioned above, it is critical that you choose the right type of salt.  There are three basic types of salt you can purchase for your water softening system including: rock salt, solar salt, and evaporated salt.

Rock Salt: This is the least expensive of the options thus contains increased levels of impurities.  This can result in a sludgy tank overtime which we know decreases the effectiveness of the system.  Rock salt also leaves the most impurities in the water.

Solar Salt: This type of salt dissolves more easily then rock salt.  Solar salt can be found in pellets and crystals and is obtained by the evaporation of seawater.

Evaporated Salt:  Acquired through a mixture of mining and evaporation, this is the purest form of salt weighing in at 99.99% sodium chloride.

The purer the salt that you put into your water softener the less residue that will be left within the tank.  This leads to fewer salt bridges and less salt sludge thus less maintenance to your water softener.

Flushing the Resin Bed

Resin beads are recharged by salt on a regular basis but even though this occurs it doesn’t hurt to fully flush the resin bed with a special water softening cleanser, which will help to keep it in top form.  To prevent ineffective resin, cleanser can be poured into the brine well and the system manually regenerated.  The system with normally discharge the cleanser during the cycle performed by the water softener.  This process will help to keep the resin functioning effectively.

Regular maintenance helps to keep all appliances running smoother and the same is true of your homes water treatment systems.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

 

3 Things You Should Know About Well Water in Your Home

Does your home have a well?  Here are some things you may want to consider when it comes to the quality of the water that is flowing throughout your home.

What is the difference between a well check vs comprehensive water testing?

Many homeowners are under a misconception that having their private wells checked will expose issues with the quality of the water as well.  This however is not the way it works.  There are major differences between what testing is required by mortgage companies in order to obtain a home loan verse the actual health aspect of the water.  Most mortgage providers are only looking to ensure that the well water system to the home isn’t faulty not the content of the actual water.  In a comprehensive water test the actual water from the well is tested for chemicals such as lead, arsenic, chromium 6, mercury, and VOCs.  As a homeowner it is up to you to have a comprehensive water analysis done on your homes water as well as the waters source.  Many companies that sell water treatment systems, such as Reynolds Water Conditioning, offer free water analysis before recommending a solution for treating your homes well water.

Where does well water contamination come from? 

It is often news to homeowners to find out that contamination from water is often from natural sources verse human contamination.  Owners of homes with private wells often are shocked to find out that their water has become contaminated.  Most often there are no obvious signs of sources that could contaminate the water nearby, so homeowners do not suspect anything.  The truth of the matter is that many contaminants within water such as arsenic occur naturally in groundwater at levels that are not safe for drinking.

Why does well water often contain more lead? 

Well water is corrosive.  Corrosive water often leak lead from pipes, soldered joints and plumbing fixtures.  Many homeowners are unaware of this fact.  If a homes plumbing predates 2014, which is when lead-free standards in home plumbing components were put in place, the potential exists that lead will seep into the tap water within the home.

It is important that homeowners with private wells understand that their water source is not regulated by the EPA or State Regulators.  Homeowners are responsible for the quality of their water.  It is important that proper water treatment systems are put in place to ensure that their homes have high quality water running throughout the home.  For a more comprehensive look at your homes water it is important to have a comprehensive water test done.  The next crucial step after the results of water testing are done is to put a system, or a number of systems, in place to ensure that the water your family is ingesting and using on a regular basis is free of harmful bacteria and containments.

At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need.  We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help!  For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.